Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 139

Page: 139 / 703

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This

feature can be activated whenever you turn on the

rear window defroster (if equipped). Refer to “Rear

Window Features” in “Understanding The Features Of

Your Vehicle” for further information.

Power Folding Mirrors — If Equipped

The switch for the power folding mirrors is located

between the power mirror switches L (left) and R (right).

Press the switch once and the mirrors will fold in,

pressing the switch a second time will return the mirrors

to the normal driving position.

NOTE:

If the vehicle speed is greater than 10 mph

(16 km/h) the folding feature will be disabled.
If the mirrors are in the folded position, and vehicle

speed is equal or greater than 10 mph (16 km/h), they

will automatically unfold.

Power Folding Mirror Switch

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands