Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 219

Page: 219 / 703

4. Within five seconds, press and release either of the

memory buttons (1) or (2). The Electronic Vehicle

Information Center (EVIC) will display which

memory position has been set.

NOTE:

•

Memory profiles can be set without the vehicle in

PARK, but the vehicle must be in PARK to recall a

memory profile.

•

To set a memory profile to your RKE transmitter, refer

to “Linking And Unlinking The Remote Keyless Entry

Transmitter To Memory” in this section.

Linking And Unlinking The Remote Keyless Entry
Transmitter To Memory

Your RKE transmitters can be programmed to recall one

of two pre-programmed memory profiles by pressing the

UNLOCK button on the RKE transmitter.

NOTE:

Before programming your RKE transmitters you

must select the “RKE Linked To Memory” feature

through the Electronic Vehicle Information Center

(EVIC). Refer to “Electronic Vehicle Information Center

(EVIC) ” in “Understanding Your Instrument Panel” for

further information.
To program your RKE transmitters, perform the follow-

ing:
1. Cycle the vehicles ignition to the OFF position.
2. Select a desired memory profile (1) or (2).

NOTE:

If a memory profile has not already been set,

refer to

Programming The Memory Feature

in this

section for instructions on how to set a memory profile.
3. Once the profile has been recalled, press and release

the SET (S) button on the memory switch.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands