Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 19

Page: 19 / 703

NOTE:

When having the Sentry Key® Immobilizer sys-

tem serviced, bring all vehicle Key Fobs with you to the

authorized dealer.

Customer Key Programming

Programming Key Fobs or RKE transmitters may be

performed at an authorized dealer.

General Information

The Sentry Key® system complies with FCC rules part 15

and with RSS-210 of Industry Canada. Operation is

subject to the following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference that may be

received, including interference that may cause unde-

sired operation.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

VEHICLE SECURITY ALARM — IF EQUIPPED

The Vehicle Security Alarm monitors the vehicle doors

for unauthorized entry and the ignition switch for unau-

thorized operation. When the alarm is activated, the

interior switches for door locks, power sliding doors and

power liftgate are disabled. The Vehicle Security Alarm

provides both audible and visible signals, for the first

three minutes, the headlights will turn on, the park lamps

and/or turn signals will flash and Vehicle Security Light

will flash repeatedly and the horn will sound. For an

additional 15 minutes, only the headlights, park lamps

and/or turn signals and Vehicle Security Light will flash.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands