Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 329

Page: 329 / 703

•

DOWN Button

Push and release the DOWN button to scroll

downward through the main menu items.

•

RIGHT Button

The RIGHT button allows access to informa-

tion in EVIC submenus, selects some feature

settings, and resets some EVIC features. The

EVIC prompts the driver when the RIGHT

button can be used by displaying the right arrow graphic.
Once the RIGHT button has been selected for the desired

submenu list, follow the EVIC prompts to

properly select the desired submenu EVIC

features

•

BACK Button

Push and release the BACK button to scroll

back to a previous menu or sub-menu.

Electronic Vehicle Information Center (EVIC)
Displays

The EVIC display consists of three sections:
1. The top line where compass direction and outside

temperature are displayed.

2. The main display area where the menus and pop up

messages are displayed.

3. The reconfigurable telltales section below the odom-

eter line.

The main display area will normally display the main

menu or the screens of a selected feature of the main

menu. The main display area also displays

pop up

UNDERSTANDING YOUR INSTRUMENT PANEL 327

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands