Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 140

Page: 140 / 703

Resetting The Power Folding Outside Mirrors

You may need to reset the power folding mirrors if the

following occurs:

•

The mirrors are accidentally blocked while folding.

•

The mirrors are accidentally manually folded/

unfolded.

•

The mirrors come out of the unfolded position.

•

The mirrors shake and vibrate at normal driving

speeds.

To reset the power folding mirrors: Fold and unfold them

by pressing the button. (This may require multiple button

pushes). This resets them to their normal position.

Illuminated Vanity Mirrors — If Equipped

An illuminated vanity mirror is located on the sun visor.

To use the mirror, rotate the sun visor down and swing

the mirror cover upward. The lights turn on automati-

cally. Closing the mirror cover turns off the lights.

Illuminated Mirror

138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands