Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 148

Page: 148 / 703

Modes Of Operation

Modes Of Operation With EVIC

Three selectable modes of operation are available in the

Electronic Vehicle Information Center (EVIC). Refer to

“Electronic Vehicle Information Center (EVIC)/Personal

Settings (Customer-Programmable Features)” in “Under-

standing Your Instrument Panel” for further information.

Blind Spot Alert Lights Only

When operating in Blind Spot Alert mode, the BSM

system will provide a visual alert in the appropriate side

view mirror based on a detected object. However, when

the system is operating in RCP, the system will respond

with both visual and audible alerts when a detected

object is present. Whenever an audible alert is requested,

the radio volume is reduced.

Blind Spot Alert Lights/Chime

When operating in Blind Spot Alert Lights/Chime mode,

the BSM system will provide a visual alert in the appro-

priate side view mirror based on a detected object. If the

turn signal is then activated, and it corresponds to an

alert present on that side of the vehicle, an audible chime

will also be sounded. Whenever a turn signal and de-

tected object are present on the same side at the same

time, both the visual and audio alerts will be issued. In

addition to the audible alert the radio (if on) volume will

be reduced.

NOTE:

•

Whenever an audible alert is requested by the BSM

system, the radio volume is reduced.

•

If the hazard flashers are on, the system will request

the appropriate visual alert only.

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands