Dodge 2015 GRAND CARAVAN Owner'S Manual Download Page 371

Page: 371 / 703

Supported Media (Disc Types)

The MP3 file recording media supported by the radio are

CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.

Supported Medium Formats (File Systems)

The medium formats supported by the radio are ISO 9660

Level 1 and Level 2 and includes the Joliet extension.

When reading discs recorded using formats other than

ISO 9660 Level 1 and Level 2, the radio may fail to read

files properly and may be unable to play the file nor-

mally. UDF and Apple HFS formats are not supported.
The radio uses the following limits for file systems:

•

Maximum number of folder levels: 8

•

Maximum number of files: 255

•

Maximum number of folders. (The radio display of file

names and folder names is limited. For large numbers

of files and/or folders, the radio may be unable to

display the file name and folder name, and will assign

a number instead. With a maximum number of files,

exceeding 20 folders will result in this display. With

200 files, exceeding 50 folders will result in this dis-

play.)

Maximum number of characters in file/folder names:

•

Level 1: 12 (including a separator

and a three-

character extension)

•

Level 2: 31 (including a separator

and a three-

character extension)

Multi-session disc formats are supported by the radio.

Multi-session discs may contain combinations of normal

CD audio tracks and computer files (including MP3 files).

Discs created with an option such as

keep disc open after

writing

are most likely multi-session discs. The use of

multi-session for CD audio or MP3 playback may result

in longer disc loading times.

UNDERSTANDING YOUR INSTRUMENT PANEL 369

Summary of Contents for 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands

Dodge 2015 GRAND CARAVAN, Owner'S Manual

Search results

Summary of Contents for 2015 GRAND CARAVAN

Reviews:

Related manuals for 2015 GRAND CARAVAN

Brands by name

Popular brands