Dentsply Sirona Orthophos SL 2D Operating Instructions Manual Download Page 94

Page: 94 / 168

64 94 954 D3632

D3632

201.03.08

23 07.2018

5 Operation

Dentsply Sirona

5.1 Acquiring the X-ray image

Operating Instructions Orthophos SL 2D / 3D

3. To adjust the collimation, select the lower or upper jaw in the

quadrant selection.

The selection is highlighted in orange.

4. Touch the cross on the left side of the submenu line.
or

➢

Touch the quadrant symbol B again.

The submenu line is closed.

The volume area is selected.
VOL1, VOL3: The collimation is set.

5.1.2.4.5

Selecting 3D exposure mode

HD mode (high-definition mode).
SD mode (standard definition mode)
Low (Low Dose exposure mode)
You can select the exposure mode via the selection list on the side for the

volume programs.

✔

Level 1 is displayed on the touchscreen.

➢ Touch the desired exposure mode.

The selection (A) is highlighted in orange. The selected mode is
displayed on the right side of the touchscreen.

If Low Dose mode is enabled the patient symbols are highlighted

with a blue bar B.

The desired mode is selected.
The SD and HD options can also be set in the Start settings menu by

default.

IMPORTANT

The Low Dose mode is not persistent and must be selected again

following each exposure if required.

Summary of Contents for Orthophos SL 2D









































































































































































Search results

Summary of Contents for Orthophos SL 2D

Reviews:

Brands by name

Popular brands

Dentsply Sirona Orthophos SL 2D, Operating Instructions Manual

Search results

Summary of Contents for Orthophos SL 2D

Reviews:

Brands by name

Popular brands