64 94 954 D3632
12
D3632
.
201.03.08
.
23 07.2018
2 Safety information
Dentsply Sirona
2.1 Basic safety information
Operating Instructions Orthophos SL 2D / 3D
2
Safety information
2.1
Basic safety information
2.2
Notes on the unit
The following symbols are applied to the unit:
This symbol can be found next to the rating plate on the unit.
Meaning: Observe the Operating Instructions when operating the unit.
This symbol can be found on the rating plate on the unit.
Meaning: The accompanying documents are available on the Dentsply
Sirona homepage.
Electrostatic discharge (ESD)
Connector pins or sockets bearing ESD warning labels must not be
touched or interconnected without ESD protective measures. See also
‘Electrostatic discharge’ and ‘Electromagnetic compatibility’.
Identification of single use devices
Prior to each exposure, the hygienic protective sleeves (single use
devices) must be fitted.
Single use devices are identified with the symbol shown on the left. They
must be disposed of immediately after use. Do not use single use devices
more than once.
2.3
Ventilation slots
Under no circumstances may the ventilation slots on the unit be covered,
since otherwise the air circulation will be obstructed. This can cause the
unit to overheat.
Do not spray into the ventilation slots
Do not spray liquids such as disinfectants into the ventilation slots. This
may lead to malfunctions. Use wipe disinfection only in the vicinity of the
ventilation slots.
2.4
Condensation
Extreme temperature fluctuations may cause condensation inside the
unit. Do not switch the unit on before it has reached normal room
temperature. See also the chapter Technical data [ → 20].
NOTE
This unit must not be operated in areas subject to explosion hazards.
Summary of Contents for Orthophos SL 2D
Page 2: ......
