64 94 954 D3632
70
D3632
.
201.03.08
.
23 07.2018
5 Operation
Dentsply Sirona
5.1 Acquiring the X-ray image
Operating Instructions Orthophos SL 2D / 3D
5.1.2.2.2
Preparing the exposure
Depending on the patient or the exposure program, accessory parts must
be replaced and the appropriate exposure mode must be selected; see
"Installation and start-up" [ → 43].
You will require the following accessories:
● Temporomandibular joint supports with ear holders
● Forehead support
➢ Insert the accessory parts to be used into the unit and pull on the
relevant hygienic protective sleeves, see "Hygienic protective
➢ Switch Sidexis to a ready-for-exposure state; see ‘Switch Sidexis to
ready-for-exposure state’.
5.1.2.2.3
Selecting an exposure program
✔
The unit is switched on and ready for exposure.
1. Touch the PAN symbol at the top of the touchscreen.
ª
The program group PAN is selected.
2. Select the exposure program. Press the arrow keys + C and - A.
ª
The exposure program is displayed in the program display (B).
3. Follow the instructions in the comment line on the touchscreen. Press
the R key if necessary.
ª
The diaphragm and the sensor move into the starting position.
ª
The exposure program is selected.
CAUTION
Pressing the R key moves the unit to the starting position.
A patient positioned in the unit may be injured by moving parts.
➢ Check that a patient is not positioned in the unit before moving it to
the starting position.
C
B
A
Ready for exposure
Summary of Contents for Orthophos SL 2D
Page 2: ......
