64 94 954 D3632
D3632
.
201.03.08
.
23 07.2018
45
Dentsply Sirona
4 Installation and start-up
Operating Instructions Orthophos SL 2D / 3D
4.1 Replacing accessories on the basic unit
4.1.3
Using the universal bite block
The universal bite block can replace all other bite blocks and contact
segments. An interchangeable bite block foam is used for the bite block,
which can also be used for patients without anterior teeth.
Bite block foam (single use device), 100 pcs.
REF 61 41 449
Inserting the bite block foam
1. Insert the plug of the top section into the opening on the bite block
plate.
2. Fold the bite block foam downwards.
3. Place the lower section onto the plug of the top section.
Adjusting the bite block height
The colored marking lines on the bite block slider are identical to the
colors of the bite blocks. These correspond to the same bite block height.
The yellow marking has the same meaning as the bite block height of the
yellow standard bite block or contact segment for the panoramic and bite
wing exposures: P1, P2, P10, P12, BW1 and BW2.
If the mandibular ramus is not displayed on the exposure and parts of the
sinus region are not necessarily of interest, then use the red marking.
The blue marking has the same meaning as the bite block height of the
blue bite block or contact segment for sinus exposures: S1, S3.
The green marking is for maxillary exposures, where the alveolar ridge of
the patient's head is aligned horizontally to position the patient a little
lower in relation to the beam path.
The gray, black and white color markings offer further grid positions each
with a position distance of 1 cm, in order to distinguish between the yellow
and blue color marking.
1. Insert the universal bite block into the unit.
2. Open the lock with the rotary knob (A).
3. Adjust the bite block slider (B), according to the required bite block
height, to the colored marking lines and lock this setting in place with
the button (A).
B
A
A
A
IMPORTANT
For programs BW1 and BW2, the universal bite block must not be used
above the black marking. The positioning is otherwise too low.
Summary of Contents for Orthophos SL 2D
Page 2: ......
