Dentsply Sirona Orthophos SL 2D Operating Instructions Manual Download Page 59

Page: 59 / 168

64 94 954 D3632

D3632

201.03.08

23 07.2018

Dentsply Sirona

5 Operation

Operating Instructions Orthophos SL 2D / 3D

5.1 Acquiring the X-ray image

5.1.2.1.5

Adjusting the Quickshot function

✔

Level 1 is displayed on the touchscreen.

1. Touch the Quickshot display A on the right side of the touchscreen.

A submenu line is opened.

2. Press the

Quick On

Quick Off

icons on the touchscreen.

The selection is highlighted orange in the submenu line.

3. Touch the cross on the left side of the submenu line.
or

➢

Touch the Quick symbol (A) again.

The submenu line is closed.

The Quickshot function is set.

5.1.2.1.6

Setting the temple width

The set temple support width changes the radiation time slightly.

The slice width for different dental arches is automatically selected in P1,

P2, P10 and their subprograms.

Ready for exposure

Summary of Contents for Orthophos SL 2D









































































































































































Search results

Summary of Contents for Orthophos SL 2D

Reviews:

Brands by name

Popular brands

Dentsply Sirona Orthophos SL 2D, Operating Instructions Manual

Search results

Summary of Contents for Orthophos SL 2D

Reviews:

Brands by name

Popular brands