64 94 954 D3632
46
D3632
.
201.03.08
.
23 07.2018
4 Installation and start-up
Dentsply Sirona
4.1 Replacing accessories on the basic unit
Operating Instructions Orthophos SL 2D / 3D
4.1.4
Using spherical bite blocks and the spherical bite block
plate
Two spherical bite blocks are available for preparing an implant drilling
template for measuring scans of the upper or lower jaw.
1. Insert the spherical bite block for mandibular exposures (A) (sphere-
down) and the spherical bite block for maxillary exposures (B)
(sphere-up) in the unit.
2. Position the spherical bite block plate (C) onto the sphere of the
corresponding spherical bite block.
The spherical bite block plate (C) contains 6 radiopaque markers
(spheres) which are used for orientation in the X-ray volume. Further
applications can be set up on this spherical bite block plate.
4.1.5
Changing the temple supports and temporomandibular
joint supports
For temporomandibular joint views, the temporomandibular joint supports
(A) "1" right and (C) "2" left must be inserted in place of the temple
supports (B).
✔
Temple supports are inserted in the unit.
1. Press the respective locking button and remove the temple supports
B.
ª
Both temple supports are removed.
2. Plug a sterile ear holder D into each of the temporomandibular joint
supports A and C.
ª
The ear holders snap into the temporomandibular joint supports.
3. Insert temporomandibular joint supports A and C into the holders on
the device.
ª
The temporomandibular joint supports snap into place.
ª
The unit is converted for temporomandibular joint exposures.
B
C
A
2
1
A
D
B
C
Summary of Contents for Orthophos SL 2D
Page 2: ......
