manualshive.com logo in svg

Dentsply Sirona Orthophos SL 2D, Operating Instructions Manual

Share
Download
Dentsply Sirona Orthophos SL 2D Operating Instructions Manual Download Page 106

 64 94 954 D3632

106

D3632

.

201.03.08

.

23 07.2018

5 Operation

Dentsply Sirona 

5.1 Acquiring the X-ray image

Operating Instructions Orthophos SL 2D / 3D

Turn the ear plug holders

Note that the holder for the ear plugs must be rotated by 90 degrees for 

symmetrical exposures and carpus exposures.
1. Grasp the holders at the very top with both hands.
2. Rotate the ear plug holders.

ª

In posterior-anterior exposure: The nose support points towards 
the sensor. In posterior-anterior exposure and carpal exposures: 

The nose support points towards the secondary diaphragm.

Protective caps and hygienic protective sleeves
➢ Plug the protective caps onto the ear plugs and pull the hygienic 

protective sleeve onto the nose support, see "Hygienic protective 

sleeves" [ → 40].

Preparing for a 2D exposure
➢ Switch Sidexis to a ready-for-exposure state; see ‘Switch Sidexis to 

ready-for-exposure state’.

Summary of Contents for Orthophos SL 2D









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands