64 94 954 D3632
D3632
.
201.03.08
.
23 07.2018
43
Dentsply Sirona
4 Installation and start-up
Operating Instructions Orthophos SL 2D / 3D
4.1 Replacing accessories on the basic unit
4
Installation and start-up
Please also see the chapter titled: “Cleaning and care [ → 137]“
4.1
Replacing accessories on the basic unit
4.1.1
Replacing the bite block, contact segment, 3D bite block
or chin rest
You will need to replace accessory parts according to the patient or
exposure program.
1. Pull the accessories upwards and out of the holder.
ª
The accessory part disengages.
2. Insert the bite block, contact segment, 3D bite block or chin rest.
ª
The bite block, contact segment, 3D bite block or chin rest
engages in position.
ª
The accessory has been replaced.
The chin rest can be combined with the bite block rod or the bar.
➢ Insert the rod for the bite block or the bar into the chin rest from
above.
4.1.2
Using the occlusal bite block
The occlusal bite block can be used for all panoramic and 3D exposures
(except temporomandibular and sinus exposures) in place of the yellow
bite block or contact segment. The angle of the bite block plate is
transmitted to the X-ray unit. The displays on the touchscreen and the
color change of the height adjustment buttons for adjusting the unit height
and an automatic stop function assist the user in positioning the patient.
An interchangeable bite block foam is used for the bite block, which can
also be used for patients without anterior teeth.
Bite block foam (single use device), 100 pieces
REF 61 41 449
Inserting the bite block foam
1. Insert the plug of the top section into the opening on the bite block
plate.
2. Fold the bite block foam downwards.
3. Place the lower section onto the plug of the top section.
Summary of Contents for Orthophos SL 2D
Page 2: ......
