Dentsply Sirona Orthophos SL 2D Operating Instructions Manual Download Page 135

Page: 135 / 168

64 94 954 D3632

D3632

201.03.08

23 07.2018

135

Dentsply Sirona

5 Operation

Operating Instructions Orthophos SL 2D / 3D

5.2 Preselecting basic settings

5.2.3

Calling the Info screen

The Info screen lists unit data that is useful for any discussions with your

service engineer.

✔

The touchscreen display is located on level 1.

1. Touch the toothed wheel (A) in the upper right corner of the

touchscreen.

The touchscreen display is located on level 2.

2. Touch the question mark (B) in the lower right corner of the

touchscreen.

The info screen is displayed.

3. Touch the arrows (C) in the scroll bar to the right of the list.

The next or previous page of the list is displayed.

4. Touch the double triangle in the upper right corner of the

touchscreen.

The display changes to level 1.

Ready for exposure

Summary of Contents for Orthophos SL 2D









































































































































































Search results

Summary of Contents for Orthophos SL 2D

Reviews:

Brands by name

Popular brands

Dentsply Sirona Orthophos SL 2D, Operating Instructions Manual

Search results

Summary of Contents for Orthophos SL 2D

Reviews:

Brands by name

Popular brands