Dell PowerConnect B-FCXs, Configuration Manual

Page: 893 / 1494

PowerConnect B-Series FCX Configuration Guide 851
53-1002266-01
Configuring IP parameters – Layer 3 Switches
26
Displaying DHCP server information
The following DHCP show commands may be entered from any level of the CLI.
Display active lease entries
The show ip dhcp-server binding command displays a specific active lease, or all active leases, as
shown in this example:
PowerConnect# show ip dhcp-server binding
The following output is displayed:
PowerConnect# show ip dhcp-server bind
Bindings from all pools:
IP Address Client-ID/ Lease expiration Type
Hardware address
192.168.1.2 001b.ed5d.a440 0d:0h:29m:31s Automatic
192.168.1.3 0012.f2e1.26c0 0d:0h:29m:38s Automatic
Syntax: show ip dhcp-server binding [< address >]
•
< address > - Displays entries for this address only
The following table describes this output.
Display address-pool information
This show ip dhcp-server address-pool command displays information about a specific address
pool, or for all address pools.
PowerConnect# show ip dhcp-server address-pools
Output similar to the following is displayed, as shown here.
Showing all address pool(s):
Pool Name: one
Time elapsed since last save: 0d:0h:6m:52s
Total number of active leases: 2
Address Pool State: active
IP Address Exclusions: 192.168.1.45
IP Address Exclusions: 192.168.1.99 192.168.1.103
Pool Configured Options:
bootfile: example.bin
dhcp-default-router: 192.168.1.1
dns-server: 192.168.1.100
domain-name: example.com
lease: 0 0 30
TABLE 154 CLI display of show ip dhcp-server binding command
This field... Displays...
IP address The IP addresses currently in the binding database
Client ID/Hardware address The hardware address for the client
Lease expiration The time when this lease will expire
Type The type of lease