manualshive.com logo in svg

Dell PowerConnect B-FCXs, Configuration Manual

The Dell PowerConnect B-FCXs user manual is essential for a smooth setup. Download the free Getting Started Manual from manualshive.com to swiftly get acquainted with this high-performance product. Explore its features and functionalities with this comprehensive manual, providing detailed instructions to optimize your experience.

Share
Download
background image

viii

PowerConnect B-Series FCX Configuration Guide

53-1002266-01

IPv6 management features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199

IPv6 management ACLs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199
IPv6 debug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
IPv6 Web management using HTTP and HTTPS  . . . . . . . . . . .200
IPv6 logging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
Name-to-IPv6 address resolution using IPv6 DNS server. . . .201
Defining an IPv6 DNS entry. . . . . . . . . . . . . . . . . . . . . . . . . . . .201
IPv6 ping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
SNTP over IPv6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
SNMP3 over IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
Specifying an IPv6 SNMP trap receiver  . . . . . . . . . . . . . . . . . .203
Secure Shell, SCP, and IPv6  . . . . . . . . . . . . . . . . . . . . . . . . . . .204
IPv6 Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204
IPv6 traceroute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205

IPv6 management commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205

Chapter 8

Configuring Spanning Tree Protocol (STP) Related Features

STP overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

Configuring standard STP parameters. . . . . . . . . . . . . . . . . . . . . . .208

STP parameters and defaults . . . . . . . . . . . . . . . . . . . . . . . . . .208
Enabling or disabling the Spanning Tree Protocol (STP) . . . . .209
Changing STP bridge and port parameters . . . . . . . . . . . . . . .210
STP protection enhancement . . . . . . . . . . . . . . . . . . . . . . . . . .212
Displaying STP information . . . . . . . . . . . . . . . . . . . . . . . . . . . .214

Configuring STP related features . . . . . . . . . . . . . . . . . . . . . . . . . . .223

Fast port span  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223
Fast Uplink Span  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225
802.1W Rapid Spanning Tree (RSTP) . . . . . . . . . . . . . . . . . . . .227
802.1W Draft 3  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265
Single Spanning Tree (SSTP) . . . . . . . . . . . . . . . . . . . . . . . . . . .269
STP per VLAN group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

PVST/PVST+ compatibility  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275

Overview of PVST and PVST+  . . . . . . . . . . . . . . . . . . . . . . . . . . 276
VLAN tags and dual mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
Configuring PVST+ support . . . . . . . . . . . . . . . . . . . . . . . . . . . .278
Displaying PVST+ support information . . . . . . . . . . . . . . . . . . .278
Configuration examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279

PVRST compatibility  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

BPDU guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

Enabling BPDU protection by port. . . . . . . . . . . . . . . . . . . . . . .282
Re-enabling ports disabled by BPDU guard . . . . . . . . . . . . . . .283
Displaying the BPDU guard status  . . . . . . . . . . . . . . . . . . . . . .283
Example console messages  . . . . . . . . . . . . . . . . . . . . . . . . . . .284

Root guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

Enabling STP root guard  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285
Displaying the STP root guard . . . . . . . . . . . . . . . . . . . . . . . . . .285
Displaying the root guard by VLAN . . . . . . . . . . . . . . . . . . . . . .285

Summary of Contents for PowerConnect B-FCXs























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect B-FCXs

IBM 8275-416 User Manual preview
8275-416
Brand: IBM Pages: 156
Danfoss LLS 4000 Installation Manual preview
LLS 4000
Brand: Danfoss Pages: 6
IDEM SAFETY SWITCHES KLM-P2L Operating Instructions preview
KLM-P2L
Brand: IDEM SAFETY SWITCHES Pages: 2
ANTAIRA LMP-1204G-SFP Series Hardware Manual preview
LMP-1204G-SFP Series
Brand: ANTAIRA Pages: 20
socomec 95333400 Instruction Manual preview
95333400
Brand: socomec Pages: 43
TRENDnet TE100-S5 Lühike Paigaldusjuhend preview
TE100-S5
Brand: TRENDnet Pages: 11
Gefen EXT-DP-EDIDP User Manual preview
EXT-DP-EDIDP
Brand: Gefen Pages: 56
Vega VEGASWING 53 Operating Instructions Manual preview
VEGASWING 53
Brand: Vega Pages: 36
Cabletron Systems 6H122-08 User Manual preview
6H122-08
Brand: Cabletron Systems Pages: 170
FS S5850-24XMG Quick Start Manual preview
S5850-24XMG
Brand: FS Pages: 43
Hama AV Selector 310 Operating Instruction preview
AV Selector 310
Brand: Hama Pages: 21
Vagner Pool PRO PIEZO 1 Instruction Manual preview
PRO PIEZO 1
Brand: Vagner Pool Pages: 5
Lantech IPGS-5 Series User Manual preview
IPGS-5 Series
Brand: Lantech Pages: 29
TRENDnet TE100-DS24 Specifications preview
TE100-DS24
Brand: TRENDnet Pages: 2
Advantech EKI-2525P User Manual preview
EKI-2525P
Brand: Advantech Pages: 28
DataParts DAP-SW1001 User Manual preview
DAP-SW1001
Brand: DataParts Pages: 5
Edge-Core ES4324 Installation Manual preview
ES4324
Brand: Edge-Core Pages: 60
steute Ex 13 Mounting And Wiring Instructions preview
Ex 13
Brand: steute Pages: 10

Brands by name

Popular brands

Load more brands