Dell PowerConnect B-FCXs, Configuration Manual

Page: 1217 / 1494

PowerConnect B-Series FCX Configuration Guide 1175
53-1002266-01
Configuring TACACS/ security
32
PowerConnect(config)#aaa authentication login privilege-mode
Syntax: aaa authentication login privilege-mode
The user privilege level is based on the privilege level granted during login.
Configuring enable authentication to prompt for password only
If Enable authentication is configured on the device, when a user attempts to gain Super User
access to the Privileged EXEC and CONFIG levels of the CLI, by default he or she is prompted for a
username and password. You can configure the Dell PowerConnect device to prompt only for a
password. The device uses the username entered at login, if one is available. If no username was
entered at login, the device prompts for both username and password.
To configure the Dell PowerConnect device to prompt only for a password when a user attempts to
gain Super User access to the Privileged EXEC and CONFIG levels of the CLI.
PowerConnect(config)#aaa authentication enable implicit-user
Syntax: [no] aaa authentication enable implicit-user
Telnet/SSH prompts when the Server is unavailable
When is the first method in the authentication method list, the device displays the login
prompt received from the server. If a user attempts to login through Telnet or SSH, but
none of the configured servers are available, the following takes place:
•
If the next method in the authentication method list is "enable", the login prompt is skipped,
and the user is prompted for the Enable password (that is, the password configured with the
enable super-user-password command).
•
If the next method in the authentication method list is "line", the login prompt is skipped, and
the user is prompted for the Line password (that is, the password configured with the enable
telnet password command).
Configuring authorization
Dell PowerConnect devices support authorization for controlling access to management
functions in the CLI. Two kinds of authorization are supported:
•
Exec authorization determines a user privilege level when they are authenticated
•
Command authorization consults a server to get authorization for commands entered
by the user
Configuring exec authorization
When exec authorization is performed, the device consults a server to
determine the privilege level of the authenticated user. To configure exec authorization on
the Dell PowerConnect device, enter the following command.
PowerConnect(config)#aaa authorization exec default
Syntax: aaa authorization exec default | none
If you specify none, or omit the aaa authorization exec command from the device configuration, no
exec authorization is performed.