Dell PowerConnect B-FCXs, Configuration Manual

Page: 103 / 1494

PowerConnect B-Series FCX Configuration Guide 61
53-1002266-01
Image file types
3
Image file types
This section lists the boot and flash image file types supported and how to install them on the
PowerConnect family of switches. For information about a specific version of code, refer to the
release notes.
Viewing the contents of flash files
The copy flash console command can be used to display the contents of a configuration file,
backup file, or renamed file stored in flash memory. The file contents are displayed on the console
when the command is entered at the CLI.
To display a list of files stored in flash memory, do one of the following:
•
For PowerConnect B-Series FCX devices, enter the show dir command at any level of the CLI, or
enter the dir command at the boot-monitor mode.
The following shows an example command output.
Syntax: show dir
To display the contents of a flash configuration file, enter a command such as the following from
the User EXEC or Privileged EXEC mode of the CLI:
TABLE 13 Software image files
Product Boot image
1
1.
Flash image
PowerConnect B-Series FCX GRZxxxxxx.bin FCXSxxxxx.bin (Layer 2) or
FCXRxxxxx.bin (Layer 3)
PowerConnect#show dir
133 [38f4] boot-parameter
0 [ffff] bootrom
3802772 [0000] primary
4867691 [0000] secondary
163 [dd8e] stacking.boot
1773 [0d2d] startup-config
1808 [acfa] startup-config.backup
8674340 bytes 7 File(s)
56492032 bytes free