Dell PowerConnect B-FCXs, Configuration Manual

Page: 1222 / 1494

1180 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Configuring TACACS/ security
32
Displaying TACACS/ statistics and
configuration information
The show aaa command displays information about all and RADIUS servers identified on
the device.
The following table describes the TACACS/ information displayed by the show aaa
command.
The show web connection command displays the privilege level of Web Management Interface
users.
TABLE 203 Output of the show aaa command for TACACS/
Field Description
key The setting configured with the tacacs-server key command. At the Super User privilege level,
the actual text of the key is displayed. At the other privilege levels, a string of periods (....) is
displayed instead of the text.
retries The setting configured with the tacacs-server retransmit command.
timeout The setting configured with the tacacs-server timeout command.
dead-time The setting configured with the tacacs-server dead-time command.
Server For each TACACS/ server, the IP address, port, and the following statistics are
displayed:
•
opens - Number of times the port was opened for communication with the server
•
closes - Number of times the port was closed normally
•
timeouts - Number of times port was closed due to a timeout
•
errors - Number of times an error occurred while opening the port
•
packets in - Number of packets received from the server
•
packets out - Number of packets sent to the server
connection The current connection status. This can be “no connection” or “connection active”.
PowerConnect#show aaa
key: foundry
retries: 1
timeout: 15 seconds
dead-time: 3 minutes
Server: 207.95.6.90 Port:49:
opens=6 closes=3 timeouts=3 errors=0
packets in=4 packets out=4
no connection
Radius key: networks
Radius retries: 3
Radius timeout: 3 seconds
Radius dead-time: 3 minutes
Radius Server: 207.95.6.90 Auth Port=1645 Acct Port=1646:
opens=2 closes=1 timeouts=1 errors=0
packets in=1 packets out=4
no connection