Dakota MAX II, Operation Manual

Page: 62 / 216

Dakota Ultrasonics
54
Note: If a number less than 1 or greater than 51 is entered, an error message
box “VALUE IS OUT OF RANGE” will be displayed.
7) Press the OK key to display the Digits Edit Box and re-enter the NUM
READS .
8) Press the OK key to save the NUM READS and return to the Group List
Items menu, or ESC to cancel entering the NUM READS .
If there’s not enough memory available to create the group, an error message
box “NOT ENOUGH MEMORY“ will be displayed. Press the OK or ESC key to
return to the Group List Items menu. It may be necessary to free some
memory in the MAX II at this time.
Selecting the Starting Bolt Number
Note: Depending on the application and layout of the project, the user won’t
always want the starting bolt to be 1. This feature allows the user to define
what the starting number will be.
1) Press the UP and DOWN arrow keys multiple times using the left
button wheel to scroll through the new Group List Items until START BOLT
NUM is highlighted.