Dakota Ultrasonics
180
1) Press the
UP
and
DOWN
arrow keys multiple times using the left
button wheel to scroll through the new
Group List Items
until
CREAT GRID
is highlighted.
2) Press the
ENTER
key to display
CREATE GRID
confirmation screen.
3) Press the
OK
key to save the group and return to the measurement screen.
14.3 Storing a reading
Now that a group has been created, it’s time to make some measurements and store
the measurements. The following procedures outline this process:
Storing a Reading
Note:
Once the group has been created it will automatically be displayed as a
grid following the create confirmation screen. It is located at the bottom of the
measurement screen and can be left open for the duration of the inspection
process. This section assumes the group was just created. Refer to the
section on “opening a group” if the file was created at another time.
Key Feature:
When the
MAX II
is displaying a
“group”
, pressing the
OK
key
will initiate an advance to row number option screen. Use the
Left, Right,
UP,
and
DOWN
arrow keys on the left or right button wheel to enter the row
number. Once the row number is correctly displayed, press the
OK
key to
advance directly to that row number in the grid log.
Key Feature:
When the
MAX II
is displaying a
“grid log”
, pressing the
ESC
key multiple times, will toggle through the display options:
DIGITS, RF,
and
RECT
views.
Summary of Contents for MAX II
