Dakota MAX II, Operation Manual

Page: 19 / 216

MAX II Bolt Tension Monitor
11
This section allows the user the ability to select a material from a list of preset
material types. Keep in mind that we are measuring elongation only. If your
material is not in the list, select a similar material type. When measuring in
elongation mode, the measurement consists of a difference equation only
(Loaded Length – Unloaded Length =

Length). Therefore, it doesn’t matter if
the ultrasonic length is different from the actual physical length, because the

Length will be the same. Example: 2.0080” physical loaded length – 2.0000”
physical unloaded length = 0.0080”

Length which is equivalent to 2.1080”
ultrasonic loaded length – 2.1000” ultrasonic unloaded length = 0.0080”

Length.
1) Press the UP and DOWN arrow keys multiple times using the left
button wheel to scroll through the sub menu items until TYPE is highlighted.
2) Press the ENTER key to display the list material types.
3) Press the UP and DOWN arrow keys multiple times using the left
button wheel to scroll through the material list until the appropriate type is
highlighted.
4) Press the ENTER key to display the confirmation screen.
5) Press the OK key to select the type and return to the menu screen, or ESC
to cancel selecting the material type.