manualshive.com logo in svg

D-Link DWS-4000 Series, Cli Command Reference

The D-Link DWS-4000 Series offers a comprehensive CLI command reference manual, allowing users to optimize their networking experience. Conveniently available for free download at manualshive.com, this invaluable resource equips users with detailed instructions and configuration guidance, ensuring seamless operations and enhanced network performance.

Share
Download
background image

  547

List of Commands

 

port-channel adminmode ...................................................................................................................................................... 90
port-channel linktrap ............................................................................................................................................................. 90
port-channel load-balance .................................................................................................................................................... 90
port-channel name................................................................................................................................................................91
port-channel static ................................................................................................................................................................88
port-channel system priority.................................................................................................................................................. 91
port-channel.......................................................................................................................................................................... 79
port-security mac-address move ........................................................................................................................................130
port-security mac-address .................................................................................................................................................. 130
port-security max-dynamic.................................................................................................................................................. 129
port-security max-static....................................................................................................................................................... 130
port-security ........................................................................................................................................................................ 129
power auto .......................................................................................................................................................................... 272
power default ...................................................................................................................................................................... 273
power-plan interval ............................................................................................................................................................. 229
power-plan mode ................................................................................................................................................................ 229
priority ................................................................................................................................................................................. 516
profile .................................................................................................................................................................................. 239
protection ............................................................................................................................................................................ 275
protocol group....................................................................................................................................................................... 37
protocol vlan group all .......................................................................................................................................................... 38
protocol vlan group ............................................................................................................................................................... 38
protocol ...............................................................................................................................................................................352
qos ap-edca ........................................................................................................................................................................ 282
qos station-edca ................................................................................................................................................................. 283
quit ...................................................................................................................................................................................... 434
radio.................................................................................................................................................................................... 239
radio.................................................................................................................................................................................... 266
radius accounting (Network Config).................................................................................................................................... 253
radius accounting (Wireless Config) ................................................................................................................................... 209
radius accounting mode ..................................................................................................................................................... 504
radius server attribute ......................................................................................................................................................... 504
radius server host ............................................................................................................................................................... 505
radius server key ................................................................................................................................................................ 506
radius server msgauth ........................................................................................................................................................ 507
radius server primary .......................................................................................................................................................... 507
radius server retransmit ...................................................................................................................................................... 508
radius server secret (Network Config) ................................................................................................................................ 251
radius server timeout .......................................................................................................................................................... 508
radius server-name............................................................................................................................................................. 208
radius server-name............................................................................................................................................................. 251
radius use–network–configuration ...................................................................................................................................... 252
radius-accounting ............................................................................................................................................................... 352
radius-auth-server ..............................................................................................................................................................352
rate ..................................................................................................................................................................................... 273
rate-limit .............................................................................................................................................................................. 269
redirect mode...................................................................................................................................................................... 247
redirect url........................................................................................................................................................................... 247
redirect-url mode ................................................................................................................................................................ 353
redirect-url .......................................................................................................................................................................... 353
redistribute (RIP) ................................................................................................................................................................ 195
reload.................................................................................................................................................................................. 434
rf-scan duration................................................................................................................................................................... 268
rf-scan other-channels ........................................................................................................................................................ 267
rf-scan sentry ...................................................................................................................................................................... 267
router rip ............................................................................................................................................................................. 190

Summary of Contents for DWS-4000 Series























































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWS-4000 Series

Ruckus Wireless Xclaim Xi-2 Quick Setup Manual preview
Xclaim Xi-2
Brand: Ruckus Wireless Pages: 3
Gyrfalcon Technology AI Buddy Plai WiFi Getting Started Manual preview
AI Buddy Plai WiFi
Brand: Gyrfalcon Technology Pages: 14
Aztech DSL1000ER Speci?Cations preview
DSL1000ER
Brand: Aztech Pages: 2
Ruijie RG-AP820-L(V2) Series Hardware Installation And Reference Manual preview
RG-AP820-L(V2) Series
Brand: Ruijie Pages: 26
Ruijie RG-AP630 CD Quick Installation Manual preview
RG-AP630 CD
Brand: Ruijie Pages: 11
MikroTik hAP ac2 Manual preview
hAP ac2
Brand: MikroTik Pages: 3
MIKRODEV DM50 Hardware Manual preview
DM50
Brand: MIKRODEV Pages: 15
Edimax Pro AP 1 How To Set Up preview
Pro AP 1
Brand: Edimax Pages: 3
XtendLan IPM-401W User Manual preview
IPM-401W
Brand: XtendLan Pages: 71
u-blox LILY-W1 Series System Integration Manual preview
LILY-W1 Series
Brand: u-blox Pages: 64
YUNKE CHINA DCWL-7962OT Installation Manual preview
DCWL-7962OT
Brand: YUNKE CHINA Pages: 35
EnGenius EAP1750 Quick Installation Manual preview
EAP1750
Brand: EnGenius Pages: 2
EnGenius EAP300 Quick Installation Manual preview
EAP300
Brand: EnGenius Pages: 3
Icom AP-95M Connection Manual preview
AP-95M
Brand: Icom Pages: 2
Blake UK PPROCEPTION ROAPCEILING Advanced Instructions preview
PPROCEPTION ROAPCEILING
Brand: Blake UK Pages: 15
LB-Link BL-M8189ME1 User Manual preview
BL-M8189ME1
Brand: LB-Link Pages: 15
RFNet AP-2001G User Manual preview
AP-2001G
Brand: RFNet Pages: 22
Ubiquiti 810354026348 Quick Start Manual preview
810354026348
Brand: Ubiquiti Pages: 28

Brands by name

Popular brands

Load more brands