D-Link DWS-4000 Series, Cli Command Reference

Page: 531 / 566

523
Utilities
U
TILITIES
SYSTEM sysapiCfgFileGet failed size = <expected size of
file> version = <expected version> Configuration did not exist or could not be read for
the specified feature. This message is usually
followed by a message indicating that default
configuration values will be used.
Table 15: Trap Mgr Log Message
Component Message Cause
Trap Mgr Link Up/Down: slot/port An interface changed link state.
Table 16: DHCP Filtering Log Messages
Component Message Cause
DHCP Filtering Unable to create r/w lock for DHCP Filtering Unable to create semaphore used for dhcp filtering
configuration structure.
DHCP Filtering Failed to register with nv Store. Unable to register save and restore functions for
configuration save.
DHCP Filtering Failed to register with NIM Unable to register with NIM for interface callback
functions.
DHCP Filtering Error on call to sysapiCfgFileWrite file Error on trying to save configuration.
Table 17: NVStore Log Messages
Component Message Cause
NVStore Building defaults for file XXX A component’s configuration file does not exist or
the file’s checksum is incorrect so the component’s
default configuration file is built.
NVStore Error on call to osapiFsWrite routine on file XXX Either the file cannot be opened or the OS’s file I/
O returned an error trying to write to the file.
NVStore File XXX corrupted from file system. Checksum
mismatch. The calculated checksum of a component’s
configuration file in the file system did not match
the checksum of the file in memory.
NVStore Migrating config file XXX from version Y to Z A configuration file version mismatch was detected
so a configuration file migration has started.
Table 18: RADIUS Log Messages
Component Message Cause
RADIUS RADIUS: Invalid data length - xxx The RADIUS Client received an invalid message
from the server.
Table 14: System Log Messages (Cont.)
Component Message Cause