D-Link DWS-4000 Series, Cli Command Reference

Page: 448 / 566

D-Link Unified Switch CLI Command Reference
440
© 2009 D-Link Corporation. All Rights Reserved
For each configured server:
T
IME
Z
ONE AND
D
AYLIGHT
S
AVINGS
T
IME
C
OMMANDS
clock timezone
This command configures the timezone by specifying an offset from the Coordinated Universal Time (UTC), which is
retreived from the SNTP server.
Term Definition
Server IP Address /
Hostname IP address or hostname of configured SNTP Server.
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
Server Reference
ID Reference clock identifier of the server for the last received valid packet.
Server Mode SNTP Server mode.
Server Maximum
Entries Total number of SNTP Servers allowed.
Server Current
Entries Total number of SNTP configured.
Term Definition
IP Address /
Hostname IP address or hostname of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to query the server in unicast mode.
Port Server Port Number.
Last Attempt Time Last server attempt time for the specified server.
Last Update Status Last server attempt status for the server.
Total Unicast
Requests Number of requests to the server.
Failed Unicast
Requests Number of failed requests from server.
Default none
Format
clock timezone offset <offset> minutes <offset> zone <offset>
Mode Global Config
Term Definition
offset Replace
<offset>
with the number of hours your time zone differs from the UTC time, in the range
–12 to 13. A negative value indicates that the time zone later than the UTC, and a positive value
indicates a time zone that is earlier than the UTC.