D-Link DWS-4000 Series, Cli Command Reference

Page: 391 / 566

383
DiffServ Class Commands
no class-map
This command eliminates an existing DiffServ class. The
<class-map-name>
is the name of an existing DiffServ class.
(The class name default is reserved and is not allowed here.) This command may be issued at any time; if the class is
currently referenced by one or more policies or by any other class, the delete action fails.
class-map rename
This command changes the name of a DiffServ class. The
<class-map-name>
is the name of an existing DiffServ class.
The
<new-class-map-name>
parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying the class.
match any
This command adds to the specified class definition a match condition whereby all packets are considered to belong to the
class.
match class-map
This command adds to the specified class definition the set of match conditions defined for another class. The
<refclassname>
is the name of an existing DiffServ class whose match conditions are being referenced by the specified
class definition.
Format
no class-map <class-map-name>
Mode Global Config
Default none
Format
class-map rename <class-map-name> <new-class-map-name>
Mode Global Config
Default none
Format
match any
Mode Class-Map Config
Default
none
Format
match class-map <refclassname>
Mode Class-Map Config