D-Link DWS-4000 Series, Cli Command Reference

Page: 333 / 566

325
WIDS Access Point RF Security Commands
no wids-security rogue-det-trap-interval
Use this command to restore the rogue detected trap interval to its default value.
wids-security standalone-cfg-invalid
(Standalone AP is operating with unexpected channel, SSID, security, or WIDS mode Rogue Detection.) Use this command
to enable rogue reporting for standalone APs operating with unexpected channel, SSID, security, or WIDS mode.
no wids-security standalone-cfg-invalid
Use this command to disable the mode to report standalone AP’s operating with unexpected channel, SSID, security, or
WIDS mode.
wids-security unknown-ap-managed-ssid
(Managed SSID received from unknown AP rogue.) Use this command to enable rogue reporting for unknown rogue APs
detected with a managed SSID.
no wids-security unknown-ap-managed-ssid
Use this command to disable reporting unknown rogue APs detected with a managed SSID.
wids-security unmanaged-ap-wired
(Unmanaged AP is detected on a wired network Rogue Detection.) Use this command to enable rogue reporting for detection
of unmanaged AP’s on a wired network.
Format
no wids-security rogue-det-trap-interval
Mode Wireless Config
Default Enable
Format
wids-security standalone-cfg-invalid
Mode Wireless Config
Format
no wids-security standalone-cfg-invalid
Mode Wireless Config
Default Enable
Format
wids-security unknown-ap-managed-ssid
Mode Wireless Config
Format
no wids-security unknown-ap-managed-ssid
Mode Wireless Config