D-Link DWS-4000 Series, Cli Command Reference

Page: 248 / 566

D-Link Unified Switch CLI Command Reference
240
© 2009 D-Link Corporation. All Rights Reserved
no standalone channel
The
no
version of this command configures the expected channel for an AP in stand-alone mode to the default – any channel
is allowed.
standalone security (Stand-alone AP expected security mode)
This command configures the expected security mode for an AP in stand-alone mode.
no standalone security
The
no
version of this command configures the expected security mode for an AP in stand-alone mode to the default – any
security mode is allowed.
standalone ssid (Stand-alone AP expected SSID)
This command configures the expected SSID for an AP in stand-alone mode.
Default 0 (any channel)
Format
standalone channel <channel>
Mode AP Config
Parameter Description
channel A valid channel from 0 to 161 from the all-country aggregate channel list. Channel zero indicates that
any valid channel is allowed.
Format
no standalone channel
Mode AP Config
Default any
Format
standalone security {any | open | wep | wpa}
Mode AP Config
Parameter Description
any All security modes are allowed; open security, WEP and WPA/WPA2.
open Only open security mode is allowed for the AP.
wep Only WEP security is allowed for the AP.
wpa Only WPA/WPA2 security is allowed for the AP.
Format
no standalone security
Mode AP Config