D-Link DWS-4000 Series, Cli Command Reference

Page: 143 / 566

135
LLDP (802.1AB) Commands
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including MED-related information.
show lldp
Use this command to display a summary of the current LLDP configuration.
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific interface or for all interfaces.
show lldp statistics
Use this command to display the current LLDP traffic and remote table statistics for a specific interface or for all interfaces.
Format
clear lldp remote-data
Mode Global Config
Format
show lldp
Mode Privileged Exec
Term Definition
Transmit Interval How frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold
Multiplier The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Re-initialization
Delay The delay before re-initialization, in seconds.
Notification
Interval How frequently the system sends remote data change notifications, in seconds.
Format
show lldp interface {<slot/port> | all}
Mode Privileged Exec
Term Definition
Interface The interface in a slot/port format.
Link Shows whether the link is up or down.
Transmit Shows whether the interface transmits LLDPDUs.
Receive Shows whether the interface receives LLDPDUs.
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0 (Port
Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Mgmt Shows whether the interface transmits system management address information in the LLDPDUs.
Format
show lldp statistics {<slot/port> | all}
Mode Privileged Exec