D-Link DWS-4000 Series, Cli Command Reference

Page: 281 / 566

273
Access Point Profile RF Commands
no power auto
The
no
version of this command disables auto power adjustment for the radio.
power default
This command configures a power setting for the radio. When auto power adjustment is enabled, this indicates an initial
default power setting; otherwise this indicates a fixed power setting.
no power default
The
no
version of this command configures the default power setting to its default value.
rate
This command is used to configure the list of supported and basic client data rates for the radio. The supported rates are
those the AP will allow when setting up communications with client stations. The basic rates are the list of data rates that all
stations associating with the AP must support.
no rate
The
no
version of this command is used to remove a basic or supported data rate from the corresponding list.
Format
no power auto
Mode AP Profile Radio Config
Default 100%
Format
power default <0-100>
Mode AP Profile Radio Config
Parameter Description
0-100 Default transmit power percentage.
Format
no power default
Mode AP Profile Radio Config
Default • 802.11a supported: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11a basic: 6, 12, 24 Mbps
• 802.11b/g supported: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
• 802.11b/g basic: 1, 2, 5.5, 11 Mbps
Format
rate {basic | supported} <value>
Mode AP Profile Radio Config
Parameter Description
value A valid data rate in Mbps based on radio mode.