D-Link DWS-4000 Series, Cli Command Reference

Page: 15 / 566

7
Command Modes
Table 6 explains how to enter or exit each mode.
AP Config Mode
DWS-4026 (Config-ap)#
Contains commands to configure entries in the local AP database,
which is used for AP validation.
AP Profile Config Mode
DWS-4026 (Config-ap-profile)#
Contains commands to configure the default AP profile settings as
well as settings for new AP profile.
AP Profile Radio Config
Mode
DWS-4026 (Config-ap-profile-radio)#
Contains commands to modify the radio configuration parameters
for an AP profile.
AP Profile VAP Config
Mode
DWS-4026 (Config-ap-profile-vap)#
Contains commands to configure radio 1 or radio 2 within an AP
profile.
Network Config Mode
DWS-4026 (Config-network)#
Contains commands to configure WLAN settings for up to 64
different networks.
ARP Access-List Config
Mode
DWS-4026 (Config-arp-access-list)#
Contains commands to add ARP ACL rules in an ARP Access List.
Captive Portal Config Mode
DWS-4026 (Config-CP)#
Contains commands to configure global captive portal settings.
Captive Portal Instance
Mode
DWS-4026 (Config-CP 1)#
Contains commands to configure a captive portal instance.
Table 6: CLI Mode Access and Exit
Command Mode Access Method Exit or Access Previous Mode
User EXEC This is the first level of access. To exit, enter
logout
.
Privileged EXEC From the User EXEC mode, enter
enable
To exit to the User EXEC mode, enter
exit
or press
Ctrl-
Z.
Global Config From the Privileged EXEC mode, enter
configure
To exit to the Privileged EXEC mode, enter
exit
, or press
Ctrl-Z
.
VLAN Config From the Privileged EXEC mode, enter
vlan database
To exit to the Privileged EXEC mode, enter
exit
, or press
Ctrl-Z
.
Interface Config From the Global Config mode, enter
interface <slot/port>
or
interface loopback <id>
or
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
Line Config From the Global Config mode, enter
lineconfig
.
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
Policy-Map Config From the Global Config mode, enter
policy-map
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
Policy-Class-Map Config From the Policy Map mode enter
class
. To exit to the Policy Map mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
Class-Map Config From the Global Config mode, enter
class-map
and specify the optional keyword
ipv4
to specify the Layer 3
protocol for this class. See “class-map” on page 382 for more
information.
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
Router RIP Config From the Global Config mode, enter
router rip
.
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
MAC Access-list Config From the Global Config mode, enter
mac access-list extended <name>
.
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
TACACS Config From the Global Config mode, enter
tacacs-server host <ip-addr>
where
<ip-addr>
is the IP address of the TACACS server
on your network.
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
DHCP Pool
Config From the Global Config mode, enter
ip dhcp pool <pool-name>
.
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
Table 5: CLI Command Modes (Cont.)
Command Mode Prompt Mode Description