D-Link DWS-4000 Series, Cli Command Reference

Page: 285 / 566

277
Access Point Profile RF Commands
no multicast tx-rate
The
no
version of this command sets the multicast transmit rate to 0.
u-apsd
This command enables the unscheduled automatic power save delivery mode for the radio.
no u-apsd
The
no
version of this command disables the unscheduled automatic power save delivery mode for the radio.
incorrect-frame-no-ack
This command configures the radio to not send any acknowledgement for incorrectly received frames.
no incorrect-frame-no-ack
The
no
version of this command configures the radio to send the acknowledgement for the incorrectly received frames.
show wireless ap profile radio
This command displays the radio configuration for an AP profile. When you enter the required profile ID, a summary view of
the radio configuration is displayed. If you enter a radio index, the radio configuration detail is displayed.
Parameter Description
rate A valid rate based on the radio mode. When the radio is operating in the 5 GHz band, values are 6,
11, 12, 18, 24, 36, 48, and 54 Mbps. When the radio is operating in the 2.4 GHz band, the values are
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps. When set to 0, the multicast transmission rate
selection is automatic.
Format
no multicast tx-rate
Mode AP Profile Radio Config
Default Enabled
Format
u-apsd
Mode AP Profile Radio Config
Format
no u-apsd
Mode AP Profile Radio Config
Default Enabled
Format
incorrect-frame-no-ack
Mode AP Profile Radio Config
Format
no incorrect-frame-no-ack
Mode AP Profile Radio Config