D-Link DWS-4000 Series, Cli Command Reference

Page: 461 / 566

453
DNS Client Commands
Example: The CLI command
ip domain name yahoo.com
will configure yahoo.com as a default domain name. For
an unqualified hostname xxx, a DNS query is made to find the IP address corresponding to xxx.yahoo.com.
no ip domain name
Use this command to remove the default domain name configured using the
ip domain name
command.
ip domain list
Use this command to define a list of default domain names to complete unqualified names. By default, the list is empty. Each
name must be no more than 256 characters, and should not include an initial period. The default domain name, configured
using the
ip domain name
command, is used only when the default domain name list is empty. A maximum of 32 names
can be entered in to this list.
no ip domain list
Use this command to delete a name from a list.
ip name server
Use this command to configure the available name servers. Up to eight servers can be defined in one command or by using
multiple commands. The parameter
<server-address>
is a valid IPv4 or IPv6 address of the server. The preference of
the servers is determined by the order they were entered.
no ip name server
Use this command to remove a name server.
Format
no ip domain name
Mode Global Config
Default none
Format
ip domain list <name>
Mode Global Config
Format
no ip domain list <name>
Mode Global Config
Format
ip name-server < server-address1 > [ server-address2...server-address8 ]
Mode Global Config
Format
no ip name-server [ server-address1...server-address8 ]
Mode Global Config