D-Link DWS-4000 Series, Cli Command Reference

Page: 297 / 566

289
WS Managed Access Point Commands
Example: The following shows an example of the command.
(DWS-4026) #wireless ap download start image-type img_dwl8600
(DWS-4026) #wireless ap download start
(DWS-4026) #wireless ap download start 00:00:84:00:50
The following text displays after you enter the command:
It takes about 12 minutes for the upgrade process to complete for an AP.
After this process, the AP reboots automatically and becomes managed again.
wireless ap power set
This command sets a new power on the managed AP radio. The power setting is not saved in the configuration, it is
maintained until the next time the AP is discovered (AP or switch reset).
wireless ap reset
This command requests the switch to reset the managed AP indicated by the MAC address.
Format
wireless ap download start [image-type img_dwl8600] [<macaddr>]
Mode Privileged EXEC
Parameter Description
img_dwl8600 The image type.
macaddr Managed AP MAC Address.
Format
wireless ap power set <macaddr> radio <1-2> <1-100>
Mode Privileged EXEC
Parameter Description
macaddr Managed AP MAC Address.
1-2 Radio Index to be configured on the managed AP.
1-100 Power to be configured for the radio on the managed AP.
Format
wireless ap reset <macaddr>
Mode Privileged EXEC
Parameter Description
macaddr Managed AP MAC address.