D-Link DWS-4000 Series, Cli Command Reference

Page: 145 / 566

137
LLDP (802.1AB) Commands
Interface RemID Chassis ID Port ID System Name
------- ------- -------------------- ------------------ ------------------
0/1
0/2
0/3
0/4
0/5
0/6
0/7 2 00:FC:E3:90:01:0F 00:FC:E3:90:01:11
0/7 3 00:FC:E3:90:01:0F 00:FC:E3:90:01:12
0/7 4 00:FC:E3:90:01:0F 00:FC:E3:90:01:13
0/7 5 00:FC:E3:90:01:0F 00:FC:E3:90:01:14
0/7 1 00:FC:E3:90:01:0F 00:FC:E3:90:03:11
0/7 6 00:FC:E3:90:01:0F 00:FC:E3:90:04:11
0/8
0/9
0/10
0/11
0/12
--More-- or (q)uit
show lldp remote-device detail
Use this command to display detailed information about remote devices that transmit current LLDP data to an interface on
the system.
Format
show lldp remote-device detail <slot/port>
Mode Privileged EXEC
Term Definition
Local Interface The interface that received the LLDPDU from the remote device.
Remote Identifier An internal identifier to the switch to mark each remote device to the system.
Chassis ID
Subtype The type of identification used in the Chassis ID field.
Chassis ID The chassis of the remote device.
Port ID Subtype The type of port on the remote device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
System
Description Describes the remote system by identifying the system name and versions of hardware, operating
system, and networking software supported in the device.
Port Description Describes the port in an alpha-numeric format. The port description is configurable.
System
Capabilities
Supported Indicates the primary function(s) of the device.
System
Capabilities
Enabled Shows which of the supported system capabilities are enabled.
Management
Address For each interface on the remote device with an LLDP agent, lists the type of address the remote LLDP
agent uses and specifies the address used to obtain information related to the device.