D-Link DWS-4000 Series, Cli Command Reference

Page: 150 / 566

D-Link Unified Switch CLI Command Reference
142
© 2009 D-Link Corporation. All Rights Reserved
show lldp med
Use this command to display a summary of the current LLDP MED configuration.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show lldp med
LLDP MED Global Configuration
Fast Start Repeat Count: 3
Device Class: Network Connectivity
(DWS-4026) #
show lldp med interface
Use this command to display a summary of the current LLDP MED configuration for a specific interface.
<slot/port>
indicates a specific physical interface.
all
indicates all valid LLDP interfaces.
Example:
The following shows example CLI display output for the command.
(DWS-4026) #show lldp med interface all
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ --------- -------- ------------ -----------
0/1 Down Disabled Disabled Disabled 0,1
0/2 Up Disabled Disabled Disabled 0,1
0/3 Down Disabled Disabled Disabled 0,1
0/4 Down Disabled Disabled Disabled 0,1
0/5 Down Disabled Disabled Disabled 0,1
0/6 Down Disabled Disabled Disabled 0,1
0/7 Down Disabled Disabled Disabled 0,1
0/8 Down Disabled Disabled Disabled 0,1
0/9 Down Disabled Disabled Disabled 0,1
0/10 Down Disabled Disabled Disabled 0,1
0/11 Down Disabled Disabled Disabled 0,1
0/12 Down Disabled Disabled Disabled 0,1
0/13 Down Disabled Disabled Disabled 0,1
0/14 Down Disabled Disabled Disabled 0,1
TLV Codes: 0- Capabilities, 1- Network Policy
2- Location, 3- Extended PSE
4- Extended Pd, 5- Inventory
--More-- or (q)uit
(DWS-4026) #show lldp med interface 0/2
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ --------- -------- ------------ -----------
Format
show lldp med
Mode Privileged Exec
Format
show lldp med interface {<slot/port> | all}
Mode Privileged Exec