D-Link DWS-4000 Series, Cli Command Reference

Page: 453 / 566

445
DHCP Server Commands
network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool on the server. Network-number is a
valid IP address, made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet
mask for the specified address pool. The prefix-length is an integer from 0 to 32.
no network
This command removes the subnet number and mask.
bootfile
The command specifies the name of the default boot image for a DHCP client. The
<filename>
specifies the boot image
file.
no bootfile
This command deletes the boot image name.
domain-name
This command specifies the domain name for a DHCP client. The
<domain>
specifies the domain name string of the client.
no domain-name
This command removes the domain name.
Default none
Format
network <networknumber> [{<mask> | <prefixlength>}]
Mode DHCP Pool Config
Format
no network
Mode DHCP Pool Config
Format
bootfile <filename>
Mode DHCP Pool Config
Format
no bootfile
Mode DHCP Pool Config
Default none
Format
domain-name <domain>
Mode DHCP Pool Config
Format
no domain-name
Mode DHCP Pool Config