D-Link DWS-4000 Series, Cli Command Reference

Page: 497 / 566

489
Access Commands
A
CCESS
C
OMMANDS
Use the commands in this section to close remote connections or to view information about connections to the system.
disconnect
Use the
disconnect
command to close HTTP, HTTPS, Telnet or SSH sessions. Use
all
to close all active sessions, or
use
<session-id>
to specify the session ID to close. To view the possible values for
<session-id>
, use the
show
loginsession
command.
show loginsession
This command displays current Telnet and serial port connections to the switch.
HTTP Session Soft
Timeout The soft timeout for un-secure http sessions in minutes.
HTTP Mode
(Secure) The secure HTTP server administrative mode.
Secure Port The secure HTTP server port number.
Secure Protocol
Level(s) The protocol level may have the values of SSL3, TSL1, or both SSL3 and TSL1.
Maximum
Allowable HTTPS
Sessions The number of allowable secure http sessions.
HTTPS Session
Hard Timeout The hard timeout for secure http sessions in hours.
HTTPS Session
Soft Timeout The soft timeout for secure http sessions in minutes.
Certificate Present Indicates whether the secure-server certificate files are present on the device.
Certificate
Generation in
Progress Indicates whether certificate generation is currently in progress.
Format
disconnect {<session_id> | all}
Mode Privileged EXEC
Format
show loginsession
Mode Privileged EXEC
Term Definition
ID Login Session ID.
User Name The name the user entered to log on to the system.
Connection From IP address of the remote client machine or EIA-232 for the serial port connection.
Idle Time Time this session has been idle.
Term Definition