D-Link DWS-4000 Series, Cli Command Reference

Page: 221 / 566

213
Unified Switch Commands
IP Address Status
---------------- ------------
1.1.1.1 Not Polled
show wireless discovery vlan-list
This show command displays the configured VLAN ID list for L2 discovery.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless discovery vlan-list
VLAN
----------------
– Default
show wireless status
This show command displays the configured global Unified Switch status parameters. The counters are aggregated for the
peer group if the switch acts as Cluster Controller. If the switch is not a Cluster Controller, the values are for this switch only;
however, the parameters that describe maximum limits are for the peer group.
Format
show wireless discovery vlan-list
Mode Privileged EXEC
Field Description
VLAN Shows the ID and name of each VLAN in the L2 Discovery list.
Format
show wireless status
Mode Privileged EXEC
Field Description
Total Access
Points The total number of access points in the managed AP database. This value is always equal to the sum
of Managed Access Points, Connection Failed Access Points, and Discovered Access Points.
Managed Access
Points The total number of APs in the managed AP database that are authenticated, configured, and have an
active connection with the Unified Switch.
Connection Failed
Access Points The number of APs that were previously authenticated and managed, but lost connection with the
Unified Switch.
Discovered Access
Points APs that have a connection with the switch, but have not yet been completely configured (i.e.,
managed APs with a discovered or authenticated status).
Maximum Managed
APs in Peer Group The total number of managed APs that the wireless system (peer group) supports.
Rogue AP
Mitigation Count Number of APs to which the wireless system is currently sending de-authentication messages to
mitigate against rogue APs.
Rogue AP
Mitigation Limit Maximum number of APs for which the system can send de-authentication frames.
Total Clients Total number of clients in the database. This total includes clients with an Associated, Authenticated,
or Disassociated status.