D-Link DWS-4000 Series, Cli Command Reference

Page: 16 / 566

D-Link Unified Switch CLI Command Reference
8
© 2009 D-Link Corporation. All Rights Reserved
C
OMMAND
C
OMPLETION AND
A
BBREVIATION
Command completion finishes spelling the command when you type enough letters of a command to uniquely identify the
command keyword. Once you have entered enough letters, press the spacebar or tab key to complete the word.
Command abbreviation allows you to execute a command when you have entered there are enough letters to uniquely
identify the command. You must enter all of the required keywords and parameters before you enter the command.
DHCPv6 Pool
Config From the Global Config mode, enter
ip dhcpv6 pool <pool-name>
.
To exit to the Global Config mode, enter
exit
. To return to the
Privileged EXEC mode, enter
Ctrl-Z
.
Wireless Config Mode From the Global Config mode, enter
wireless
.
To exit to Global Config mode, enter
exit
. To return to User
EXEC mode, enter
Ctrl-Z
.
AP Config Mode From the Wireless Config mode, enter
ap database <macaddr>
where
<macaddr>
is the MAC address of the AP to
configure..
To exit to Wireless Config mode, enter
exit
. To return to the
User EXEC mode, enter
Ctrl-Z
.
AP Profile Config Mode From the Wireless Config mode, enter
ap profile <1-16>
where
<1-16>
is the profile ID.
To exit to Wireless Config mode, enter
exit
. To return to User
EXEC mode, enter
Ctrl-Z
.
AP Profile Radio Config
Mode From the AP Profile Config mode, enter
radio <1-2>
.
To exit to AP Profile Config mode, enter
exit
. To return to User
EXEC mode, enter
Ctrl-Z
.
AP Profile VAP Config
Mode From the AP Profile Radio Config mode, enter
vap <0-15>
where
<0-15>
is the VAP ID.
To exit to AP Profile Radio Configmode, enter
exit
. To return to
User EXEC mode, enter
Ctrl-Z
.
Network Config Mode From the Wireless Config mode, enter
network <1-64>
where
<1-64>
is the network ID.
To exit to Wireless Config mode, enter
exit
. To return to User
EXEC mode, enter
Ctrl-Z
.
ARP Access-List Config
Mode From the Global Config mode, enter
arp access-list
To exit to the Global Config mode, enter the
exit
command.
To return to the Privileged EXEC mode, enter
Ctrl-Z
.
Captive Portal Config
Mode From the Global Config mode, enter
captive-portal
To exit to the Global Config mode, enter the
exit
command. To
return to the User EXEC mode, enter
Ctrl-Z
.
Captive Portal Instance
Mode From the Captive Portal Config Mode, enter
configuration [cp-id]
where
[cp-id]
is the captive portal instance ID.
To exit to the Captive Portal Config mode, enter
exit
. To return
to the User EXEC mode, enter
Ctrl-Z
.
Table 6: CLI Mode Access and Exit (Cont.)
Command Mode Access Method Exit or Access Previous Mode