D-Link DWS-4000 Series, Cli Command Reference

Page: 524 / 566

D-Link Unified Switch CLI Command Reference
516
© 2009 D-Link Corporation. All Rights Reserved
tacacs-server timeout
Use the
tacacs-server timeout
command to set the timeout value for communication with the servers. The
<timeout>
parameter has a range of 1-30 and is the timeout value in seconds.
no tacacs-server timeout
Use the
no tacacs-server timeout
command to restore the default timeout value for all TACACS servers.
key
Use the
key
command in TACACS Configuration mode to specify the authentication and encryption key for all TACACS
communications between the device and the TACACS server. This key must match the key used on the TACACS daemon.
The
<key-string>
parameter specifies the key name. For an empty string use “ ”. (Range: 0 - 128 characters).
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted format. When you save the
configuration, these secret keys are stored in encrypted format only. If you want to enter the key in encrypted format, enter
the key along with the encrypted keyword. In the show running config command’s display, these secret keys are displayed
in encrypted format. You cannot show these keys in plain text format.
port
Use the
port
command in TACACS Configuration mode to specify a server port number. The server
<port-number>
range is 0 - 65535.
priority
Use the
priority
command in TACACS Configuration mode to specify the order in which servers are used, where 0 (zero)
is the highest priority. The
<priority>
parameter specifies the priority for servers. The highest priority is 0 (zero), and the
range is 0 - 65535.
Default 5
Format
tacacs-server timeout <timeout>
Mode Global Config
Format
no tacacs-server timeout
Mode Global Config
Format
key [ <key-string> | encrypted <key-string>]
Mode TACACS Config
Default 49
Format
port <port-number>
Mode TACACS Config
Default 0
Format
priority <priority>
Mode TACACS Config