D-Link DWS-4000 Series, Cli Command Reference

Page: 435 / 566

427
Logging Commands
no logging cli-command
This command disables the CLI command Logging feature.
logging console
This command enables logging to the console. You can specify the
<severitylevel>
value as either an integer from 0 to
7 or symbolically through one of the following keywords:
emergency
(0),
alert
(1),
critical
(2),
error
(3),
warning
(4),
notice
(5),
info
(6), or
debug
(7).
no logging console
This command disables logging to the console.
logging host
This command enables logging to a host. You can configure up to eight hosts. The
<ipaddr|hostname>
is the IP address
of the logging host. The
<addresstype>
indicates the type of address (ipv4 or dns) being passed. The
<port>
value is a
port number from 1 to 65535. You can specify the
<severitylevel>
value as either an integer from 0 to 7 or symbolically
through one of the following keywords:
emergency
(0),
alert
(1),
critical
(2),
error
(3),
warning
(4),
notice
(5),
info
(6), or
debug
(7).
logging host remove
This command disables logging to host. See “show logging hosts” on page 429 for a list of host indexes.
Format
no logging cli-command
Mode Global Config
Default disabled; critical when enabled
Format
logging console [severitylevel]
Mode Global Config
Format
no logging console
Mode Global Config
Default • port—514
• level—critical (2)
Format
logging host <ipaddr|hostname> <addresstype> [<port>][<severitylevel>]
Mode Global Config
Format
logging host remove <hostindex>
Mode Global Config