D-Link DWS-4000 Series, Cli Command Reference

Page: 452 / 566

D-Link Unified Switch CLI Command Reference
444
© 2009 D-Link Corporation. All Rights Reserved
no hardware-address
This command removes the hardware address of the DHCP client.
host
This command specifies the IP address and network mask for a manual binding to a DHCP client. Address and Mask are
valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. The prefix-length
is an integer from 0 to 32.
no host
This command removes the IP address of the DHCP client.
lease
This command configures the duration of the lease for an IP address that is assigned from a DHCP server to a DHCP client.
The overall lease time should be between 1-86400 minutes. If you specify
infinite
, the lease is set for 60 days. You can
also specify a lease duration.
Days
is an integer from 0 to 59.
Hours
is an integer from 0 to 23.
Minutes
is an integer from
0 to 59.
no lease
This command restores the default value of the lease time for DHCP Server.
Format
no hardware-address
Mode DHCP Pool Config
Default none
Format
host <address> [{<mask> | <prefix-length>}]
Mode DHCP Pool Config
Format
no host
Mode DHCP Pool Config
Default 1 (day)
Format
lease [{<days> [<hours>] [<minutes>] | infinite}]
Mode DHCP Pool Config
Format
no lease
Mode DHCP Pool Config