D-Link DWS-4000 Series, Cli Command Reference

Page: 536 / 566

D-Link Unified Switch CLI Command Reference
528
© 2009 D-Link Corporation. All Rights Reserved
Protected Ports unable to set protected port group This appears when a dtl call fails to add interface
mask at the driver level.
Protected Ports Cannot delete intIfNum xxx from group yyy This appears when a dtl call to delete an interface
from a group fails.
Protected Ports Cannot update group YYY after deleting interface
XXX This message appears when an update group for
a interface deletion fails.
Protected Ports Received an interface change callback while not
ready to receive it This appears when an interface change call back
has come before the protected port component is
ready.
Table 30: IP Subnet VLANS Log Messages
Component Message Cause
IPsubnet vlans ERROR vlanIpSubnetSubnetValid :Invalid subnet This occurs when an invalid pair of subnet and
netmask has come from the CLI.
IPsubnet vlans IP Subnet Vlans: failed to save configuration This message appears when save configuration of
subnet vlans failed.
IPsubnet vlans vlanIpSubnetCnfgrInitPhase1Process: Unable to
create r/w lock for vlanIpSubnet This appears when a read/write lock creations
fails.
IPsubnet vlans vlanIpSubnetCnfgrInitPhase2Process: Unable to
register for VLAN change callback This appears when this component unable to
register for vlan change notifications.
IPsubnet vlans vlanIpSubnetCnfgrFiniPhase1Process: could not
delete avl semaphore This appears when a semaphore deletion of this
component fails.
IPsubnet vlans vlanIpSubnetDtlVlanCreate: Failed This appears when a dtl call fails to add an entry
into the table.
IPsubnet vlans vlanIpSubnetSubnetDeleteApply: Failed This appears when a dtl fails to delete an entry
from the table.
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed to add
an Entry This appears when a dtl fails to add an entry for a
vlan add notify event.
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed to
delete an Entry This appears when a dtl fails to delete an entry for
an vlan delete notify event.
Table 31: MAC-based VLANs Log Messages
Component Message Cause
Mac based VLANS MAC VLANs: Failed to save configuration This message appears when save configuration of
Mac vlans failed.
Mac based VLANS vlanMacCnfgrInitPhase1Process: Unable to
create r/w lock for vlanMac This appears when a read/write lock creations
fails.
Mac based VLANS Unable to register for VLAN change callback This appears when this component unable to
register for vlan change notifications.
Mac based VLANS vlanMacCnfgrFiniPhase1Process: could not
delete avl semaphore This appears when a semaphore deletion of this
component fails.
Mac based VLANS vlanMacAddApply: Failed to add an entry This appears when a dtl call fails to add an entry
into the table.
Table 29: Protected Ports Log Messages (Cont.)
Component Message Cause