D-Link DWS-4000 Series, Cli Command Reference

Page: 419 / 566

411
System Information and Statistics Commands
show eventlog
This command displays the event log, which contains error messages from the system. The event log is not cleared on a
system reset.
show hardware
This command displays inventory information for the switch.
show version
This command displays inventory information for the switch.
Interface For a service port the output is
Management
. For a network port, the output is the slot/port of the
physical interface.
Format
show eventlog
Mode Privileged EXEC
Term Definition
File The file in which the event originated.
Line The line number of the event.
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Unit The unit for the event.
Note: Event log information is retained across a switch reset.
Note: The
show version
command and the
show hardware
command display the same information. In future
releases of the software, the
show hardware
command will not be available. For a description of the command
output, see the command “show version” on page 411 .
Format
show hardware
Mode Privileged EXEC
Note: The
show version
command will replace the
show hardware
command in future releases of the
software.
Format
show version
Mode Privileged EXEC
Term Definition