D-Link DWS-4000 Series, Cli Command Reference

Page: 388 / 566

D-Link Unified Switch CLI Command Reference
380
© 2009 D-Link Corporation. All Rights Reserved
Example:
The following shows example CLI display output for the command.
(DWS-4026) #show classofservice trust 0/1
Class of Service Trust Mode: Untrusted
Untrusted Traffic Class: 1
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The slot/port parameter is
optional and is only valid on platforms that support independent per-port class of service mappings. If specified, the class-
of-service queue configuration of the interface is displayed. If omitted, the most recent global configuration settings are
displayed.
If you specify the interface, the command also displays the following information.
Example:
The following shows example CLI display output for the command.
(DWS-4026) #show interfaces cos-queue 0/1
Interface...................................... 0/1
Interface Shaping Rate......................... 64
Queue Id Min. Bandwidth Scheduler Type Queue Management Type
Term Definition
Non-IP Traffic
Class The traffic class used for non-IP traffic. This is only displayed when the COS trust mode is set to trust
IP Precedence or IP DSCP (on platforms that support IP DSCP).
Untrusted Traffic
Class The traffic class used for all untrusted traffic. This is only displayed when the COS trust mode is set to
'untrusted'.
Format
show interfaces cos-queue [<slot/port>]
Mode Privileged EXEC
Term Definition
Queue Id An interface supports 8 queues numbered 0 to 7.
Minimum
Bandwidth The minimum transmission bandwidth guarantee for the queue, expressed as a percentage. A value
of 0 means bandwidth is not guaranteed and the queue operates using best-effort. This is a configured
value.
Scheduler Type Indicates whether this queue is scheduled for transmission using a strict priority or a weighted scheme.
This is a configured value.
Queue
Management Type The queue depth management technique used for this queue (tail drop).
Term Definition
Interface The slot/port of the interface. If displaying the global configuration, this output line is replaced with a
Global Config indication.
Interface Shaping
Rate The maximum transmission bandwidth limit for the interface as a whole. It is independent of any per-
queue maximum bandwidth value(s) in effect for the interface. This is a configured value.