D-Link DWS-4000 Series, Cli Command Reference

Page: 227 / 566

219
Unified Switch Commands
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless trapflags
AP Failure Traps............................... Disable
AP State Change Traps.......................... Disable
Client Failure Traps........................... Disable
Client State Change Traps...................... Disable
Peer Switch Traps.............................. Disable
RF Scan Traps.................................. Disable
Rogue AP Traps................................. Disable
WIDS Status Traps.............................. Disable
Wireless Status Traps.......................... Disable
show trapflags (modified command)
The existing Unified Switch show trapflags command is modified to show the global Unified Switch trap configuration. See
the command “show trapflags” on page 503 .
show wireless tunnel-mtu
This show command displays the configured network MTU size. This is a global configuration for all managed access points.
show wireless agetime
This show command displays the configured age times for the status database entries.
RF Scan Traps Shows whether RF Scan Traps are enabled.
Rogue AP Traps Shows whether Rogue AP Traps are enabled.
WIDS Status Traps Shows whether WIDS Status Traps are enabled.
Wireless Status
Traps Shows whether Wireless Status Traps are enabled.
Format
show wireless tunnel-mtu
Mode Privileged EXEC
Format
show wireless agetime
Mode Privileged EXEC
Field Description
Ad Hoc Client
Status Age (hours) Shows how long to continue to display an ad hoc client in the status list since it was last detected.
AP Failure Status
Age (hours) Shows how long to continue to display a failed AP in the status list since it was last detected.
RF Scan Status
Age (hours) Shows how long to continue to display an AP detected through the RF Scan since it was last detected.
Detected Clients
Age (hours) Shows how long to keep an entry in the Detected Client Status list.
Field Description