D-Link DWS-4000 Series, Cli Command Reference

Page: 247 / 566

239
Local Access Point Database Commands
profile
This command configures the AP profile to be used to configure this AP. The profile configuration is used only if the AP mode
is Unified Switch-managed.
no profile
The
no
version of this command sets the current profile ID for the AP to the default profile.
radio
This command allows you to configure fixed channel and/or power settings for a radio on the AP. If the channel is not valid
for the physical mode configured within the AP configuration profile, this configuration is ignored.
standalone channel (Stand-alone AP expected channel)
This command configures the expected channel for an AP in stand-alone mode.
Default The default password is blank.
Format
password encrypted <password>
Mode AP Config
Parameter Description
password The password in encrypted format, 128 hexadecimal characters.
Default 1 - Default
Format
profile <1-16>
Mode AP Config
Parameter Description
1-16 Indicates the AP profile ID for AP configuration.
Format
no profile
Mode AP Config
Default channel 0 (auto), power 0 (auto)
Format
radio <1-2> {channel <channel> | power <0-100>}
Mode AP Config
Parameter Description
1-2 The radio interface on the AP.
channel 0 (auto) or a fixed channel for the radio. The valid range is based on the configured country code.
0-100 0 (auto) or a fixed transmit power for the radio. The value is entered as % of maximum power.